After fixing the sample in the S28 system, the device sensor will automatically lower the contact point with the tested workpiece and move along the vertical direction of the cutting burr. The burr will be depicted and recorded according to the value. Due to the use of a flexible clamping system, the sample can be quickly and safely positioned.

The S30 system uses laser sensors to determine the curvature of the cut sample. Once the sample is fixed by the operator, the value of the curvature will be displayed on the display screen, and the results will be evaluated and recorded in the measurement software interface

Optional configuration
Measurement of curvature

The wavy cut is generated by the residual tension of the belt, therefore, the SMP waviness measurement system has been developed, which can be fixed, portable, or online to check the waviness of the product.

Fixed
The sample is placed in front of two baffles, and the optical sensor unit checks the deviation between the reference lines for final inspection and displays the value on the display screen.

Portable
Due to its lightweight hollow shape and powerful battery life, SMP-P can be ultra long and can be measured by placing the edges of the material. The test results are displayed on the display screen

On-line measurement
Three optical sensors observe the straightness of the edge of the strip steel during production and operation, and all results are transmitted to the measurement software for evaluation

Imess SW is a certified measurement system with an accuracy of 10 times higher than the product tolerance

The SW series products include solutions for measuring the width of the winding line, which can be flexibly adjusted according to user needs and on-site installation space.

Features:
Measure the material width at the beginning and end of the cutting process Save changeover time;
• Reduce product defect rates; • Using a lateral camera for measurement in a stationary state
• Measurement speed of 100mm/sec • Report/QA interface/Archive
• Independent interface • Stable structure and reliable measurement

System accuracy
Tolerance of ± 0,01 mm. 0,1 mm, cg>1,67

Imess application measures strip steel material online through two laser sensors
• Using the principle of difference to obtain thickness results
• C-frame, enclosed frame or fixed instrument position suitable for your space needs
• High accuracy and fast measurement speed
• No radiation protection certification required

The testing software displays the accurate process of thickness measurement, and can also observe various positions

SW-TM: Measurement of width and thickness of rolled material

During the camera based strip width measurement process (see page 5), the strip thickness is measured using a laser sensor

The Imess SQ series measuring table can be used to detect the most important sheet metal geometric dimensions, and each individual measuring table can be combined according to the required measurement characteristics.

These systems are fully automated for measuring sheet samples and the entire sheet, and each testing station can be used to support quality assurance testing control in production sites or laboratories.

The SB system can measure the width of the sheet online, and according to requirements, flexible or mobile cameras can be used for continuous monitoring, accurately detecting the edges of the sheet under backlight

SB flexibility
The position of the camera varies depending on the width of the sheet
High measurement efficiency

SB fixed type
Various fixed cameras respond to changes in width simultaneously
High measurement efficiency

Feature
Fast online measurement
Store results with material roll numbers
Convenience
Fully controllable through PLC (Slave)
The measuring device has a large distance from the strip steel to avoid mutual interference

The S4 system checks the geometric dimensions of the sheet metal on the uncoiling and fixed length production line, including length, width, and squareness. The lengths of the diagonal lines of the sheet are deducted from each other, and measurements are made after cutting.

Feature
• Steel or marble version
• Consistent measurement data recording
• QA assessment

Measure each sheet
Optional configuration
+Knife feedback
+Measure length only